T-Block® accessories
Keys, sockets, handles, drivers and interfaces to install every T-Block ground screw the right way, from manual work on small sites to powered installation with an excavator.
Installation accessories
Keys, sockets, handles and tools to install T-Block ground screws with any method: by hand, with an electric driver or with a hydraulic rotary drive.
Manual installation with a socket
13 accessories
41 mm socket — 3/4" drive
CMBTB41A
41 mm socket with a 3/4" square drive. Pairs with the 3/4" T-handle (TH075) to install T-Block ground screws with a 41 mm hex head by hand.
41 mm socket — 1" drive
CMBTB41B
41 mm socket with a 1" square drive. Pairs with the 1" T-handle (TH100) to install T-Block ground screws with a 41 mm hex head by hand.
46 mm socket — 3/4" drive
CMBTB46A
46 mm socket with a 3/4" square drive. Pairs with the 3/4" T-handle (TH075) to install T-Block ground screws with a 46 mm hex head by hand.
46 mm socket — 1" drive
CMBTB46B
46 mm socket with a 1" square drive. Pairs with the 1" T-handle (TH100) to install T-Block ground screws with a 46 mm hex head by hand. Can also be used with a hydraulic rotary drive through the PMBB coupler.
60 mm socket — 3/4" drive
CMBTB60A
60 mm socket with a 3/4" square drive. Pairs with the 3/4" T-handle (TH075) to install T-Block ground screws with a 60 mm hex head by hand.
60 mm socket — 1" drive
CMBTB60B
60 mm socket with a 1" square drive. Pairs with the 1" T-handle (TH100) to install T-Block ground screws with a 60 mm hex head by hand. Can also be used with a hydraulic rotary drive through the PMBB coupler.
70 mm socket — 3/4" drive
CMBTB70A
70 mm socket with a 3/4" square drive. Pairs with the 3/4" T-handle (TH075) to install T-Block ground screws with a 70 mm hex head by hand.
70 mm socket — 1" drive
CMBTB70B
70 mm socket with a 1" square drive. Pairs with the 1" T-handle (TH100) to install T-Block ground screws with a 70 mm hex head by hand. Can also be used with a hydraulic rotary drive through the PMBB coupler.
T-handle — 3/4" drive
TH075
Sliding T-handle with a 3/4" square drive for sockets. Pairs with the CMBTB41A, CMBTB46A, CMBTB60A and CMBTB70A sockets for manual installation. Also suitable for final levelling on T-Block ground screws with a round flange and a 3/4" square hole.
T-handle — 1" drive
TH100
Sliding T-handle with a 1" square drive for sockets. Pairs with the CMBTB41B, CMBTB46B, CMBTB60B and CMBTB70B sockets for manual installation. Also suitable for final levelling on T-Block ground screws with a round flange and a 1" square hole.
Adapter 3/4" F → 1" M
RR1M75F
3/4" female to 1" male adapter. Lets you use 1" drive sockets with the 3/4" T-handle (TH075), so there is no need to buy the 1" handle for occasional jobs.
Kit: 3/4" T-handle + 41 mm socket
TH075CMBTB41A
Complete kit with a 3/4" T-handle (TH075) and a 41 mm socket with 3/4" drive (CMBTB41A). Everything you need to install T-Block ground screws with a 41 mm hex head by hand.
Kit: 3/4" T-handle + 46 mm socket
TH075CMBTB46A
Complete kit with a 3/4" T-handle (TH075) and a 46 mm socket with 3/4" drive (CMBTB46A). Everything you need to install T-Block ground screws with a 46 mm hex head by hand.
Manual installation — dedicated key
4 accessories
Ø60 tube key — Ø22 through hole
CMT1F
Ø60 steel tube key for headless T-Block ground screws designed for a 60 mm post. The Ø22 through hole at the top takes a 600 mm C40/C45 steel bar that transmits the installation torque without bending. The two side holes engage the T-Block during installation.
Ø20 bar, L600 mm — electro-galvanized
MCM20ZE
Solid round bar, Ø20 mm, 600 mm long, in C40/C45 steel with an electro-galvanized finish. It goes through the hole of the dedicated keys (CMT1F and similar) to transmit the turning torque during manual installation.
Ø48 key for a 30 mm T-post — galvanized
CMT30F20ZE
Ø48 tube key, 600 mm long, in electro-galvanized steel. Designed for T-Block ground screws with a head shaped for a 30 mm T-post. Ø20 through hole for the turning bar.
Ø48 key for a 35 mm T-post — galvanized
CMT35F20ZE
Ø48 tube key, 600 mm long, in electro-galvanized steel. Designed for T-Block ground screws with a head shaped for a 35 mm T-post. Ø20 through hole for the turning bar.
Installation with an electric driver
10 accessoriesTBDRIVER POWER PLUS — special electric driver
TBDPP37
Special electric driver with an aluminium reaction bar, designed only for the powered installation of T-Block ground screws. High tightening torque, 1-1/2" square output. Pairs with the CMBTB__C MACHINE sockets and the STES stabilisers.
TBDriver support kit
SSTBDK
Support kit for the TBDRIVER driver: aluminium reaction bar, quick-release coupling and handlebar. Keeps the driver steady and under control during powered installation.
46 mm MACHINE socket — 1-1/2" drive
CMBTB46C
46 mm socket with a 1-1/2" square drive for use with the TBDRIVER POWER PLUS special electric driver. The 1-1/2" drive matches the TBDRIVER output directly.
60 mm MACHINE socket — 1-1/2" drive
CMBTB60C
60 mm socket with a 1-1/2" square drive for use with the TBDRIVER POWER PLUS special electric driver. The 1-1/2" drive matches the TBDRIVER output directly.
70 mm MACHINE socket — 1-1/2" drive
CMBTB70C
70 mm socket with a 1-1/2" square drive for use with the TBDRIVER POWER PLUS special electric driver. The 1-1/2" drive matches the TBDRIVER output directly.
Adapter 1-1/2" F → 1" M
AQ150F100M
1-1/2" female to 1" male square adapter. Lets you use 1" drive sockets with the TBDRIVER special electric driver, whose output is a 1-1/2" square.
Stabiliser for 41 mm socket — M10 bolt
STES41M10
Screw-on stabiliser in electro-galvanized steel, designed for the 41 mm socket and an M10 bolt. Keeps the socket centred on the T-Block head during installation with the electric driver.
Stabiliser for 46 mm socket — M12 bolt
STES46M12
Screw-on stabiliser in electro-galvanized steel, designed for the 46 mm socket and an M12 bolt. Keeps the socket centred on the T-Block head during installation with the electric driver.
Stabiliser for 60 mm socket — M16 bolt
STES60M16
Screw-on stabiliser in electro-galvanized steel, designed for the 60 mm socket and an M16 bolt. Keeps the socket centred on the T-Block head during installation with the electric driver.
Stabiliser for 70 mm socket — M16 bolt
STES70M16
Screw-on stabiliser in electro-galvanized steel, designed for the 70 mm socket and an M16 bolt. Keeps the socket centred on the T-Block head during installation with the electric driver.
Installation with a rotary drive
2 accessories
Socket-to-socket coupler 1" — L76 mm
PMBB
1" male/male extension, 76 mm long. It joins two sockets back to back to form a composite adapter for hydraulic rotary drives. The upper socket fits the rotary drive output (for example a 50 or 70 hex), the lower socket drives the T-Block head.
50 mm MACHINE socket — 1" drive
CMBTB50B
50 mm socket with a 1" square drive, for use with an excavator or a tracked mast machine fitted with a threaded cone and a 50 mm male output. Pairs with the PMBB/Z1603 coupler and the T-Block head socket to form the composite adapter.
Temporary interface for headless T-Block models
1 accessory
Looking for the right T-Block?
Browse the full catalogue to find the ground screw that suits your application.
Go to the product catalogue →